TEC B-680 SERIES Maintenance Manual page 99

6. DIAG. TEST OPERATION
Mode Name
PARAMETER CLEAR
NOTES: 1. Total media distance covered (TL FEED) and the adjustment value for the sensors cannot
be cleared.
2. Data stored on the flash memory card cannot be cleared with this procedure. To clear data
on the flash memory card, send the format command to initialize the card. For details, refer
to the External Equipment Interface Specification.
3. For data to be cleared in the RAM clear mode, refer to the RAM clear mode table.
4. After RAM clear is performed, the threshold setting value will turn to the default (0). When
using pre-printed labels, be sure to set the threshold after referring to the Owner's Manual.
Item
Issue mode
PC save automatic calling
Kanji code
EURO font code
Web printer function selection
Media Sensor Selection
6-69
Function
Initial Value
(Batch printing
without Cut)
Fixed Type
EO18-33006
6.6 RAM CLEAR MODE
Standard
ON
TYPE 1
B0H
OFF