Dump Mode - TEC B-680 SERIES Maintenance Manual

7. ON LINE OPERATION

7.2 Dump Mode

Receive buffer data of RS-232C I/F, Centronics I/F, Network I/F, and BASIC Interpreter are dumped
in this mode. Communication data and Network connection can be checked.
O N L I N E
P A U S E
Press and hold the [RESTART] key for at least 3 seconds.
< 1 > R E S E T
Press the [RESTART] key twice.
< 3 > D U M P
Press the [PAUSE] key.
B U F F E R
Select receive buffer with the [FEED] key or [RESTART] key.
Press the [PAUSE] key.
N O W P R I N T I N G . . .
Power On
Press the [PAUSE] key.
M O D E
R S -
The printer is in stand-by or printing.
The printer enters the pause state.
A reset menu is displayed.
A dump mode menu is displayed.
RS-232C:
2 3 2 C
NETWORK:
CENTRO:
BASIC 1:
BASIC 2:
Receive buffer data is printed. After that,
the display restores the dump mode menu.
7-2
(Revision Date: Apr. 25, 2002)
RS-232C receive buffer
Network I/F receive buffer
Centronics I/F receive buffer
BASIC Interpreter
(I/F Interpreter buffer)
BASIC Interpreter
(Interpreter Printer buffer)
EO18-33006
7.2 Dump Mode