Ip Address Setting Mode - TEC B-680 SERIES Maintenance Manual

6. DIAG. TEST OPERATION

6.7 IP ADDRESS SETTING MODE

Host IP Address, Printer IP Address, Gateway IP Address, SUBNET mask and Socket Port setting are
available in this mode.
< 1 > D I A G N O S T I C
Press the [FEED] key 5 times.
< 6 > I P
[FEED] key or [RESTART] key.
H O S T
. 0 0 0 . 0 0 0 . 0 0 0
0 0 0
NOTES: 1. 0 to 255 are set into each IP address setting value.
2. The factory-set initials for each parameter setting are as follows:
HOST IP ADDRESS
PRINTER IP ADDRESS
GATEWAY IP ADDRESS
SUBNET MASK
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
A D D R E S S
Press the [PAUSE] key.
Select one item with the
I P A D D R E S S
Press the [PAUSE] key.
Enter each value with
the [FEED] key and
[RESTART] key.
Pressing the [PAUSE]
key after setting all values
selects other item.
Press the [FEED]
and [RESTART] key
at the same time.
Parameter
V 1 . 0 A
Continued from
A
to set the socket port, go to the next page.
HOST IP ADDRESS
PRINTER IP ADDRESS
GATEWAY IP ADDRESS
SUBNET MASK
SOCKET PORT
Pressing the [PAUSE] key allows you to set or change the value of the leftmost 3 digits.
Each time the [PAUSE] key is pressed, the setting moves to the next 3 digits to the right.
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
Press the [PAUSE] key.
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
[FEED] key: Pressing the [FEED] key one
time is a -1 change, up to 0.
(See NOTE.)
[RESTART] key: Pressing the [RESTART] key
one time is a +1 change up to
255. (See NOTE.)
Initial
192. 168. 10. 10
192. 168. 10. 20
0. 0. 0. 0
255. 255. 255. 0
6-72
(Revision Date: Apr. 25, 2002)
6.7 IP ADDRESS SETTING MODE
B
on the next page.
O 0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
Press the [PAUSE] key.
O 0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
Press the [PAUSE] key.
EO18-33006
O
O