Video Output Connector [2] Location Verticaloffset; Video Output Connector [2] Overscanlevel; Video Output Connector [2] Rgbquantizatonrange; Video Layout Disabledisconnectedlocaloutputs - Cisco DX70 Administrator's Manual

Cisco DX70 and DX80

Introduction

Video Layout DisableDisconnectedLocalOutputs

This setting is fixed to On.
Default value: On
Value space: On
On: The built-in layout engine does only set layout on local outputs having a monitor
connected.

Video Monitors

Define the monitor layout mode. Note that this video system supports only one monitor, so
this value is fixed and cannot be changed.
Requires user role: ADMIN
Default value: Single
Value space: Single
Single: The layout is shown on the video system's monitor.

Video Output Connector [1] Brightness

Define the brightness level for the video system's integrated display.
Requires user role: ADMIN, USER
Default value: 80
Value space: Integer (0..100)
Range: The value must be between 0 and 100.

Video Output Connector [2] CEC Mode

The HDMI output (Output Connector 2) is for future use.

Video Output Connector [2] Location HorizontalOffset

The HDMI output (Output Connector 2) is for future use.
D15362.02 DX70 and DX80 Administrator Guide CE8.3, JANUARY 2017.
Configuration Peripherals Maintenance

Video Output Connector [2] Location VerticalOffset

The HDMI output (Output Connector 2) is for future use.

Video Output Connector [2] OverscanLevel

The HDMI output (Output Connector 2) is for future use.
Video Output Connector [1..2] Resolution
Connector 1: The resolution and refresh rate for the integrated display. This value is fixed
and cannot be changed.
Connector 2: The HDMI output (Output Connector 2) is for future use.
Default value: Connector 1: 1920_1080_60
Value space: Connector 1: 1920_1080_60
1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.

Video Output Connector [2] RGBQuantizatonRange

The HDMI output (Output Connector 2) is for future use.

Video Output Connector [1] Whitebalance Level

The integrated display's color temperature (white balance) is adjustable from 4000 K (warm)
to 9000 K (cool).
Requires user role: ADMIN, USER
Default value: 6500
Value space: Integer (4000..9000)
The color temperature in Kelvin.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
114
Administrator Guide
System settings System settings Appendices