Siemens SIMATIC S5 Manual page 6

Introduction
Courses
Siemens provide SIMATIC S5 users with extensive opportunities for training.
For more information, please contact your Siemens representative.
Reference literature
This manual is a comprehensive description of the IP 267 stepper motor
controller. Other topics of the SIMATIC® S5 range are only briefly dealt with. You
will find more detailed information in the following literature:
• Programming primer for the SIMATIC® S5-100U
Practical Exercises with the PG 615 Programmer
Siemens AG, Berlin and Munich, 1988
Contents:
- Design and installation of the S5-100U programmable controller
- Introduction to programming with the PG 615
Order No.: ISBN 3-8009-1528-6
• Speicherprogrammierbare Steuerungen SPS (available in Germany only)
Volume1: Logic and sequential controls, from the control problem to the
control program.
Günter Wellenreuther, Dieter Zastrow
Braunschweig 1987
Contents:
- How a programmable controller works
- The theory of logic control using the STEP 5 programming language for
SIMATIC S5 programmable controllers.
Order No.: ISBN 3-528-04464-0
viii
IP 267
EWA 4NEB 812 6061-02a