Draytek VIGOR3300V+ User Manual page 72

5. Confirm the settings are correct, and then finish the configuration.
Start to dial by using telephones.
Phone 1 calls Phone 2 --->Press 2901# or 888829*61*31*167*135#.
Phone 2 calls Phone 1--->Press 3301#.
Note: # indicates termination of the phone number. After pressing #, VoIP is immediately
called out. Or you may wait 3 seconds if you do not press #. With 2910V you can't only
dial alphanumeric addresses or @ symbols. To dial an IP address, start and end it with a #
(hash) replace the dots with * (star). In this example you have to press
#220*135*240*207#. But 3300V+ can only receive the format of Number@IP. So it is
required to setup 3300V+'s number (888833@220.135.240.207) in the DialPlan entry.
Vigor3300V+ Series User's Guide
64