Table of Contents
Advertisement
Byte In
Packet Out
Byte Out
Uptime
Refresh
Disconnect
4.6.2 PPTP & L2TP
P
P
T
P
G
e
n
P
P
T
P
G
e
n
To configure the general setup, please click VPN>> PPTP & L2TP>>General
Setup>>PPTP General Setup.
Status
PPTP Authentication
PPTP Encryption
User Authentication
Enable/Disable
Display the bytes count received by this tunnel.
Display the packets count sent out by this tunnel.
Display the bytes count sent out by this tunnel.
Display the time duration since the tunnel is established.
Allow you to refresh current VPN status.
Allow you to disconnect the select VPN connection.
e
r
a
l
S
e
t
u
p
e
r
a
l
S
e
t
u
p
Set the function to Active or Inactive.
Allow you to choose an authentication mode to be used. The
default setting is CHAP.
Allow you to choose an encryption mode to be used. If PPTP
authentication mode is set to CHAP or PAP, PPTP
Encryption mode does not need to be set.
Set user authentication to Local server or RADIUS server.
Enables or disables the Mutual Authentication function.
178
Vigor3300V+ Series User's Guide
Advertisement
Table of Contents
