3.2.7 VoIP Basic
Protocol – Select Protocol
Select the communication protocol (SIP or MGCP) and the IP Address (WAN or LAN/VPN)
used by VoIP. You need to configure relative settings at first. Please refer to the figure below
as an example of Vigor 3300V+.
Protocol – SIP Accounts
Router provides default configuration for SIP accounts. You can click any one of the radio
buttons and click Edit to modify the SIP account for your necessity.
Port Settings
This page displays the basic settings for each port. Click the Edit icon in the Phone Number
page to enter the Edit page. Then you can configure this port.
Vigor3300V+ Series User's Guide
45
Need help?
Do you have a question about the VIGOR3300V+ and is the answer not in the manual?
Questions and answers