Recording Audio From A Connected Component; Recording On A Connected Component - Sony CMT-M700DVD Operating Instructions Manual

Recording audio from a
connected component
Making a digital recording
from a digital component
The Serial Copy Management system (page 86)
may prevent you from making a digital
recording of certain material. In this case,
connect the component to ANALOG IN jacks
and make an analog recording.
1
Connect the digital optical cable.
2
Start recording manually.
See "Recording on an MD manually" (page
41) or "Recording on a tape manually"
(page 65).
Tips
• You can activate Time Machine Recording (page
42) and Smart Space/Auto Cut functions (page 45).
• You can adjust the recording level when recording
on an MD (page 45).
Making an analog recording
from an analog component
1
Connect the audio cords.
2
Start recording manually.
See "Recording on an MD manually" (page
41) or "Recording on a tape manually"
(page 65).
Recording on a connected
component
1
Connect the digital optical cable.
2
Start recording.
Refer to the operating instructions provided
with connected component.
Note
You can digitally record from the discs only.
However, you cannot record from copy prohibited
discs.
GB
75