Recording Audio From A Connected Component; Recording On A Connected Component - Sony CMT-HPX11D Operating Instructions Manual

Recording audio from a
connected component
1
Connect audio cords.
See "Hooking up optional components" on
page 47.
2
Start recording manually.
See "Recording on a tape manually" on
page 37.
Recording on a connected
component
Making a digital recording on
an MD
1
Connect a digital optical cable.
See "Hooking up optional components" on
page 47.
2
Start recording on the connected
component.
Refer to the operating instructions provided
with the connected component.
Notes
• When making a digital recording from the disc player
of this system to an optional component (MD deck,
etc.) connected to the DIGITAL OUT jack, start the
optional component recording in advance.
• You cannot make a digital recording in the following
cases:
– When using copy-guarded DVDs.
– When using Dolby Digital or DTS bit stream
output.
GB
49