Programming Md Tracks; Program Play - Sony CMT-M700DVD Operating Instructions Manual

Programming MD tracks

— Program Play

You can make a program of up to 25 tracks.
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press PLAY MODE/TUNING MODE on
the remote in stop mode repeatedly
until "PGM" appears.
3
Press MD . or > on the remote
repeatedly until the desired track
number appears.
Selected track number
TRACK
PGM
4
Press ENTER/YES on the remote.
The track is programmed.
The step number appears, followed by the
track number in the programmed sequence
and the total playing time of the program.
If you made a mistake, you can clear the last
programmed track from the program by
pressing CLEAR on the remote.
Last programmed
track number
TRACK
PGM
Playing time of the
selected track
MIN SEC
L-SYNC
Total playing time
MIN SEC
L-SYNC
5
To program additional tracks, repeat
steps 3 and 4.
6
Press MD N on the remote.
Other operations
Do this
To
Cancel Press PLAY MODE/TUNING
MODE on the remote in stop mode
Program Play
repeatedly until both "PGM" and
"SHUF" disappear.
Press MD . or > on the
Check the
program order remote repeatedly during Program
Play.
Press DISPLAY on the remote in
Check the total
number of stop mode. The total number of
programmed programmed steps appears,
followed by the last programmed
tracks
track number and the total playing
time of the program.
Perform steps 3 and 4 in stop
Add a track to
the end of the mode.
program
Press CLEAR on the remote in
Erase a track
stop mode. Each time you press
the button, the last programmed
track is erased.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press MD
N on the remote. However, the program is cleared
after you remove the MD or press GROUP on the
remote.
• "---.--" appears when the total program time
exceeds 1,000 minutes.
GB
35