Download  Print this page

Listening To Audio From A Connected Component; Recording Audio From A Connected Component - Sony LBT-XGV8 Operating Instructions Manual

Hide thumbs

Advertisement

Listening to audio from a
connected component
Listening to an MD deck or
VCR, etc.
1
Connect the audio cords.
See "Hooking up optional components" on
page 33.
2
Press FUNCTION (or FUNCTION +/– on
the remote) repeatedly until "MD" or
"VIDEO" appears.
Start playing the connected component.
Notes
• Holding down FUNCTION (or FUNCTION +/– on
the remote), and then pressing `/1 while the power
is off automatically turns the power on and selects
"VIDEO" as the function. When the system is in
power saving mode, this function does not work.
• If the sound is distorted or too loud when "VIDEO"
is selected or you want to switch back to "MD,"
repeat the operation described above to switch to
"MD."
Listening to a turntable, etc.
1
Connect the audio cords.
See "Hooking up optional components" on
page 33.
2
Press FUNCTION (or FUNCTION +/– on
the remote) repeatedly until "PHONO"
appears.
Start playing the connected component.
Listening to a video game or
camcorder, etc.
1
Connect the audio cords.
See "Hooking up optional components" on
page 33.
2
Press FUNCTION (or FUNCTION +/– on
the remote) repeatedly until "GAME"
appears or press GAME in the right
corner of the front panel.
Start playing the connected component.
Recording audio from a
connected component
Making an analogue
recording from an analogue
component on a tape
1
Connect the audio cords.
See "Hooking up optional components" on
page 33.
2
Start recording manually.
See "Recording to a tape" on page 22.
GB
35

Advertisement

Table of Contents

   Related Manuals for Sony LBT-XGV8

This manual is also suitable for:

Lbt-xgv6

Comments to this Manuals

Symbols: 0
Latest comments: