Table of Contents
Advertisement
Enjoying the 5.1 channel
sound with the optional
amplifier
(DHC-NXM2D only)
1
Connect a digital optical cord.
See "Hooking up optional components" on
page 55.
2
Connect 6 speakers to an AV amplifier
equipped with a decoder.
For the speaker placement, refer to the
operating instructions supplied with the
connected amplifier.
3
Switch the output to 5.1 channel Dolby
Digital sound or 5.1 channel DTS
sound.
See "Changing the sound/subtitle/
language" on page 25.
Tip
You cannot use the surround effect of this system.
Recording audio from a
connected component
1
Connect audio cords.
See "Hooking up optional components" on
page 55.
2
Start recording manually.
See "Recording on a tape manually" on
page 43.
Recording on a connected
component
Making an analog recording
1
Connect audio cords.
See "Hooking up optional components" on
page 55.
2
Start recording.
Refer to the operating instructions provided
with the connected component.
Making an analog recording
from a VIDEO CD to a video
tape
1
Connect optional audio cords from the
VIDEO/SAT OUT L/R (audio) jacks and
the supplied video cable from the
VIDEO OUT jack to your VCR.
2
Start recording.
Refer to the operating instructions provided
with the connected component.
Note
If you connect a video deck between this system and
the TV, you may experience video leakage when
watching the video signal from this system. Do not
connect a video deck between this system and the TV.
GB
57
Advertisement
Table of Contents
