Recording On A Tape Manually; Manual Recording; Sound Adjustment; Adjusting The Sound - Sony CMT-M700DVD Operating Instructions Manual

Recording on a tape
manually

— Manual Recording

You can record just the portions you like from
a CD or an MD on a tape. You can also record
a radio programme.
You can use TYPE I (normal) tape.
1
Load a recordable tape.
2
Press FUNCTION repeatedly to select
the desired source to record.
• DVD: To record from this system's
DVD/CD player.
• MD: To record from this system's MD
deck.
• TUNER: To record from this system's
tuner.
• OPTICAL IN: To record from the
optional component connected to the
OPTICAL IN jack.
• ANALOG IN: To record from the
optional component connected to the
ANALOG IN jacks.
3
Press z TAPE.
"N" lights up and the tape deck stands by
for recording.
To start recording from the side facing away
from you, press TAPE nN until
"n" lights up.
4
Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
If you start from the reverse side, recording
stops at the end of the reverse side.
5
Press X TAPE, then start playing the
desired source to record.
To
Do this
Stop recording
Press x (or TAPE x on the
remote).
Pause recording
Press X (or TAPE X on the
remote).

Sound Adjustment

Adjusting the sound

Generating a more dynamic sound
(Dynamic Sound Generator)
Press DSG on the remote.
To cancel the DSG, press DSG on the remote
again.
Adjusting the bass and treble
1
Press BASS/TREBLE on the remote
repeatedly to select "BASS" or "TREBLE".
2
While "BASS" or "TREBLE" appears, press
MENU + or – on the remote repeatedly to
adjust the level.
GB
65