Optional Components; Hooking Up Optional Components - Sony CMT-M700DVD Operating Instructions Manual

Optional Components

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
Optional digital
component
To the digital input jack
of an optional digital
component
From the audio
output jacks of an
optional analog
component
Optional analog
component
A DIGITAL OPTICAL IN jack
Use a digital optical cable (square, not
supplied) to connect an optional digital
component (digital satellite receiver, etc.) to
this jack. You can then listen to the sound from
the component.
B DIGITAL OPTICAL OUT jack
Use a digital optical cable (square, not
supplied) to connect an amplifier, MD deck, or
DAT deck with a digital optical input jack. You
can then output the digital audio to the
component from this system. If the jack is
covered with a cap, remove it before use.
C ANALOG IN jacks
Use audio cords (not supplied) to connect an
optional analog component (cassette deck, etc.)
to these jacks. You can then listen to the sound
from the component.
Optional digital
component
From the digital output
jack of an optional
digital component
Sony PC connection kit
D PC LINK jack
Use an Sony PC connection kit (not supplied)
that supports this system to connect the
personal computer.
E VIDEO OUT jack
Use a video cable to connect an optional
component (such as a TV) to this jack. You can
then output the video to the component from
this unit, and enjoy the video images of DVDs,
etc.
F S VIDEO OUT jack
Use an S video cable (not supplied) to connect
an optional component (such as a TV) to this
jack. You can then output the video to the
component from this unit, and enjoy higher
quality video images.
Optional TV
To the S video
To the video
input jack of a
input jack of a
TV
TV
GB
73