Sony CMT-M700DVD Operating Instructions Manual page 59

4
Press MENU + or – on the remote
repeatedly until "Fade In?" or "Fade
Out?" appears, then press ENTER/YES
on the remote.
5
Press MD . or > on the remote
repeatedly until the track number you
want to change the recording level
appears, then press ENTER/YES on the
remote.
"Time 5.0s" appears.
6
While monitoring the sound, press
MENU + or – on the remote repeatedly
to change the Fade-in or Fade-out
recording time.
The system plays the portion that will be
recorded over using Fade-in or Fade-out
Recording. You can set the time at any
value between 1.0 second and 15.0 seconds,
in 0.1 second steps. You cannot set the time
longer than the track.
7
Press ENTER/YES on the remote.
"S.F Edit OK?" appears.
8
Press ENTER/YES on the remote again.
The deck starts recording over the existing
track. "S.F Edit: ** %" appears while the
track is being recorded. When the recording
finishes, "Complete!" appears.
To cancel the operation
Press MENU/NO on the remote during step 3
through 7. After pressing ENTER/YES on the
remote in step 8 to start recording, you cannot
interrupt the operation.
Notes
• You cannot change the recording level of the tracks
recorded in MDLP mode.
• Repeatedly changing the recording level results in
poor sound quality.
• The recording level will not return to the exact
original level once the recording level has been
changed even if it returned to the original level.
• The recording level cannot be changed while the
timer is activated.
• You cannot undo the S.F Edit Function even if you
use the Undo Function.
GB
59