Moving Recorded Tracks; Move Function - Sony CMT-M700DVD Operating Instructions Manual

Erasing recordings (continued)
6
Press ENTER/YES on the remote if
point A is correct.
"Point B set" appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
If the point A is incorrect, press MD .
or > on the remote repeatedly to find the
starting point of the portion to be erased
(point A) while monitoring the sound, then
press ENTER/YES on the remote.
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 Stereo mode) or by
4-frame intervals (in LP4 Stereo mode).
7
Continue playback until the deck
reaches point B, then press ENTER/
YES on the remote.
"A-B Ers" and "Point B ok?" appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
8
Press ENTER/YES on the remote if
point B is correct.
If the point B is incorrect, press MD .
or > on the remote repeatedly to find the
ending point of the portion to be erased
(point B) while monitoring the sound, then
press ENTER/YES on the remote.
You can shift the point by 1/86 second
(1 frame) intervals.*
* You can shift the point by 2-frame intervals (in
Monaural mode and LP2 Stereo mode) or by
4-frame intervals (in LP4 Stereo mode).
Tip
To shift the point by minute or second intervals in
steps 6 and 8, press MD m or M on the remote
repeatedly to flash minute, second, or frame
indication, then press MD . or > on the
remote.
Minute Second
GB
54
Frame

Moving recorded tracks

— Move Function

You can use this function to change the order
of any track on the disc. When you move
tracks, the tracks are automatically
renumbered.
Example: Moving track 3 to position 2.
Track number
1 2
Original
A B
tracks
2
1
After
A
MOVE
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO on the remote to
display "Edit Menu".
3
Press MENU + or – on the remote
repeatedly until "Move?" appears, then
press ENTER/YES on the remote.
4
Press MD . or > on the remote
repeatedly until the desired track
number to move appears, then press
ENTER/YES on the remote.
3 4
C D
3 4
C B D