D-Link xStack DES-3800 Series User Manual page 132

RX Mode
Authentication
Password
State
Interface Metric
Click Apply to implement changes made.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Toggle among Disabled, V1 Only, V2 Only, and V1 or V2. This entry specifies which version
of the RIP protocol will be used to interpret received RIP packets. Disabled prevents the
reception of RIP packets.
Toggle between Disabled and Enabled to specify that routers on the network should us the
Password above to authenticate router table exchanges.
A password to be used to authenticate communication between routers on the network.
Toggle between Disabled and Enabled to disable or enable this RIP interface on the switch.
A read only field that denotes the Metric value of the current IP Interface setting.
117