Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
Static ARP Table
The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. This table
allows network managers to view, define, modify and delete ARP information for specific devices.
Static entries can be defined in the ARP Table. When static entries are defined, a permanent entry is entered and is used to
translate IP address to MAC addresses.
To open the Static ARP Table open the Configuration folder, and then open the Layer 3 IP Networking folder and click
on the Static ARP Settings link.
To add a new entry, click the Add button, revealing the following screen to configure:
To modify a current entry, click the corresponding Modify button of the entry to be modified, revealing the following
screen to configure:
The following fields can be set or viewed:
Parameter
IP Address
MAC Address
After entering the IP Address and MAC Address of the Static ARP entry, click Apply to implement the new entry. To
completely clear the Static ARP Settings, click the Clear All button.
Figure 6- 120. Static ARP Settings window
Figure 6- 121. Static ARP Settings – Add window
Figure 6- 122. Static ARP Settings – Edit window
Description
The IP address of the ARP entry. This field cannot be edited in the Static ARP
Settings – Edit window.
The MAC address of the ARP entry.
155
Advertisement
Table of Contents
