Safeguard Engine Status - D-Link xStack DES-3800 Series User Manual

Safeguard Engine Status

The following window displays parameters configured for and about the Safeguard Engine Status currently set on the Switch.
Figure 12- 3. Safeguard Engine Status and CPU Utilization Information window
The information is described as follows:
Parameter
State
Current Status
Interval
Rising Threshold
Falling Threshold
Trap/log
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Description
Displays the current running state of the Safeguard Engine, whether enabled or disabled.
Displays the current running status of the Safeguard Engine, whether engaged or in normal
mode.
Displays the time interval between the checking of the rising and falling threshold of packets
entering the Switch. The default setting is 5 seconds.
Displays the set percentage of the rising threshold of packets determinant of the Safeguard
Engine.
Displays the set percentage of the falling threshold of packets determinant of the Safeguard
Engine.
Displays the status of the sending of messages to the switch's log or SNMP trap. Enabled
will denote the switch will send trap messages in the event of a Safeguard Engine
engagement.
255