D-Link xStack DES-3800 Series User Manual page 192

The page shown below is the IP Access Profile Configuration page.
The following parameters can be set, for IP:
Parameter
Profile ID (1-255)
Type
VLAN
Source IP Mask
Destination IP Mask
DSCP
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 10- 3. Access Profile Configuration (IP)
Description
Type in a unique identifier number for this profile set. This value can be set from 1 – 255, yet
only 9 access profiles can be created on the Switch.
Select profile based on Ethernet (MAC Address), IP address, Packet Content Mask. This will
change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
•
header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
•
Select Packet Content Mask to specify a mask to hide the content of the packet
•
header.
Selecting this option instructs the Switch to examine the VLAN part of each packet header
and use this as the, or part of the criterion for forwarding.
Enter an IP address mask for the source IP address.
Enter an IP address mask for the destination IP address.
Selecting this option instructs the Switch to examine the DiffServ Code part of each packet
header and use this as the, or part of the criterion for forwarding.
177