Provisioning Set-Up - Cisco Codec C Series Getting Started Manual

Cisco TelePresence Video Systems
Contents

Provisioning set-up

(When using a provisioning system)
Start the Provisioning Wizard
Tap the user name in the upper left corner, and tap Settings.
Tap Administrator > Provisioning and then Start.
NOTE: When you start up a MX or EX system for the first time,
the Provisioning Wizard starts automatically.
Choose provisioning infrastructure
Choose one of the following supported provisioning systems:
• Cisco VCS (Video Communication Server)
• WebEx Telepresence
• Cisco UCM (Unified Communications Manager)
• Cisco UCM via Expressway
Tap Next to proceed.
Back to task overview
D14639.12 Video Systems Getting Started Guide TC7.0, DECEMBER 2013.
Introduction User interfaces
Enter required parameters
Enter the parameters required for the chosen provisioning infrastructure. Then tap
Cisco VCS
Contact your VCS provider to get the IP address or DNS name
of the Cisco VCS
required, the
video system with the provisioning server.
Have a look at the
information on VCS provisioning.
WebEx TelePresence
Upon ordering the Cisco WebEx Telepresence service, you have
received a Video number
Please contact your company's WebEx Telepresence
administrator, if you do not have a video phone number and
an activation code.
Confirguration Configuration
(External Manager), the SIP Domain, and, if
Username and Password for authenticating the
Cisco VCS provisioning appendix for more
and an Activation code.
13
Getting Started Guide
Appendices
Register to complete the procedure.
Cisco UCM
Contact your UCM provider to get the IP address or DNS name
of the Cisco UCM (External Manager).*
You can find more details about setting up Cisco UCM
provisioning in the Administering TC endpoints on CUCM
guide
Cisco UCM via Expressway
Upon ordering this service, you have received a
Password. Enter those in the corresponding input fields. The
user name is in the form user@your.edge.domain.
In some cases, you must manually enter the Expressway
address. Tick the Manually override Expressway
enter the address you have received upon ordering in the
External Manager field.
* The DHCP server can be set up to provide the External Manager address
automatically (DHCP Option 150). Any input set up here overrides the
setting provided by DHCP.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Contacts
Username and
address, and