Section 5
Routine Maintenance
Replace Air Sample
Electronics Section
5-6
Steri-Cycle CO
Incubator
2
1. Connect one end of the air sample filter to the hose barb on the
chamber ceiling.
Filter
2. Connect the other end of the filter to the metal tubing on the HEPA
filter adapter (Figure-5-8).
Figure 5-8. Connect to Metal Tubing
1. Turn off the incubator's power switch and unplug the power cord.
2. Remove the three screws from the back of the cabinet top.
3. Slide the top backward about an inch and lift it off.
Thermo Fisher Scientific