Control Panel Components - Thermo Scientific 370 Operating And Maintenance Manual

Section 1
Installation and Start-Up
Control Panel
Components
1-2 Steri-Cycle CO Incubator
2
Silence - Mutes the audible alarm.
Alarm Indicator - Light pulses on/off during an alarm condition.
Mode Select Switch - Used to select Run, Setpoints, Calibration and
System Configuration Modes.
Message Center - Displays system status.
Mode Select Indicators -
Run: Run Menu
Set: Set Points Menu
Cal: Calibrate Menu
Config: Configuration Menu
Up and Down Arrows - Increases or decreases number values, toggles
between choices.
Enter - Stores the value into computer memory.
Heat Indicator - Lights when power is applied to heaters.
Temp Display - Programmable to display temperature continuously, RH
continuously (with RH option), or toggle between temperature and
humidity (with RH option). See Configuration Section.
Scroll for Parameters Arrows - Moves the operator through selected
mode choices.
CO Inject Indicator - Lights during CO
2
%CO2 Display - Displays CO
Figure 1-2. Control Panel
injection into chamber.
2
percentage continuously.
2
Thermo Fisher Scientific