Removing A Fan Module; Installing A Fan Module; Verifying Fan Module Operation; Replacing The Uid Health Module - HP storevirtual 3200 User Manual

For information on interpreting the status, see "Related reference".
2. Check the fan module heath in the Storage System Hardware Report available from the StoreVirtual
Management Console.
There is also an alert triggered when the fan module fails.
Related reference
Status LED descriptions on page 15

Removing a fan module

Procedure
1. Press in the fan module release buttons (1).
2. Slide the module (2) out of the enclosure.

Installing a fan module

Procedure
1. Slide the replacement fan module into the enclosure until it clicks into place

Verifying fan module operation

Procedure
1. Ensure that the fan module is operating properly by checking the status LEDs. For more information, see
"Related reference".
Related reference
Status LED descriptions on page 15

Replacing the UID health module

Verifying UID health module failure

The operation of the blue UID health module LED can be checked using the following methods:
62 Removing a fan module
1
1
2