Battery Maintenance - Projecta HDBM4000 Instruction Manual

2.4 BATTERY MAINTENANCE

The device has two advanced operating modes for the maintenance of 6/12/24V
batteries (ADVANCED PROGRAMS), press and hold the "MODE"button for 3
seconds (fig. A.22) recommended for AGM and WET type batteries:
– DESULFATION: recovery of sulphated batteries (fig. A.10);
– EQUALIZATION: reset of optimal battery conditions (fig. A.9).
ADVANCED MENU SELECTION
MODE
3"
ADVANCED MENU SELECTION
On completing the selected process, disconnect the power cable from the mains
BATTERY VOLTAGE
socket and disconnect the clamps from the battery terminals.
MODE
BUTTON LOCK. It is possible to lock and unlock the setting by simultaneously
pressing and holding the "BATTERY VOLTAGE" (fig. A.21) and "CHARGE RATE"
(fig. A.23) buttons for 3 seconds, and (fig. A.2) (fig. A.4) "LOK on" and"LOK off"
3"
will appear respectively on the display.
BATTERY VOLTAGE
BATTERY VOLTAGE
BATTERY VOLTAGE
EXIT – ADVANCED MENU
TO EXIT THE "ADVANCED PROGRAMS" MENU:
Press and hold the "MODE" button (fig. A.22) for 3 seconds.
EXIT – ADVANCED MENU
FUNCTION SELECTION
18
MODE
ADVANCED
PROGRAMS
BEEP
KEYBOARD LOCK
CHARGE RATE
ADVANCED
3"
PROGRAMS
BEEP
KEYBOARD UNLOCK
KEYBOARD LOCK
CHARGE RATE
CHARGE RATE
3"
3"
KEYBOARD UNLOCK
CHARGE RATE
MODE
3"
3"
BEEP
MODE
3"
BEEP
MENU
MENU DISPLAY
DISPLAY
DISPLAY
DISPLAY