Projecta HDBM4000 Instruction Manual page 8

11. Choice of the battery production technology:
WET: lead-acid batteries with liquid electrolyte;
GEL: lead-acid batteries, sealed, with solid electrolyte;
AGM: lead-acid batteries, sealed, with electrolyte on absorbent material;
PbCa: lead-calcium batteries.
12. SUPPLY mode.
13. DIAGNOSTIC mode.
14. PULSE TRONIC charge process phases.
15. START mode.
16. Automatic charge mode.
17. Pulse Tronic charge.
18. Alternator Test Function.
19. Battery starting capacity test.
20. Battery charge status test.
21. BATTERY VOLTAGE – Settings button:
– Battery voltage 6/12/24V.
– Silent mode.
– Voltage/Current adjustment.
22. MODE – Settings button:
– Pulse Tronic CHARGE (AUTO, AUTO d, WET, GEL, AGM, PbCa).
– TEST (battery status, vehicle alternator, battery starting capacity).
– Advanced Programmes (DESULFATION, EQUALIZATION, DIAGNOSTIC, SUPPLY).
– Voltage/Current adjustment.
23. CHARGE RATE – Settings button:
– Output current (AUTO, BOOST, customised);
– START mode.
8