General Safety Instructions - Samson 3767 Mounting And Operating Instructions

1 General safety instructions
For your own safety, follow these instructions concerning the mounting, start up and opera-
tion of the device:
− The device is to be mounted, started up or operated only by trained and experienced
personnel familiar with the product. According to these mounting and operating instruc-
tions, trained personnel refers to individuals who are able to judge the work they are as-
signed to and recognize possible dangers due to their specialized training, their knowl-
edge and experience as well as their knowledge of the applicable standards.
− Any hazards that could be caused in the valve by the process medium, the signal pres-
sure or by moving parts are to be prevented by taking appropriate precautions.
If inadmissible motions or forces are produced in the pneumatic actuator as a result of
the supply pressure level, it must be restricted using a suitable supply pressure reducing
station.
− Explosion-protected versions of this device are to be operated only by personnel who has
undergone special training or instructions or who is authorized to work on explosion-pro-
tected devices in hazardous areas. See section 7.
To avoid damage to any equipment, the following also applies:
− Proper shipping and storage are assumed.
Note:

Devices with a CE marking fulfill the requirements of the Directives 2014/34/EU and
2014/30/EU.
The declaration of conformity is included at the end of these instructions.
EB 8355-2 EN
General safety instructions
5