General Safety Instructions - Samson 3725 Mounting And Operating Instructions

General safety instructions

1 General safety instructions
For your own safety, follow these instructions concerning the mounting, start up and opera-
tion of the positioner:
− The device is to be mounted, started up or operated only by trained and experienced
personnel familiar with the product. According to these mounting and operating instruc-
tions, trained personnel is referred to as individuals who are able to judge the work they
are assigned to and recognize possible dangers due to their specialized training, their
knowledge and experience as well as their knowledge of the applicable standards.
− Explosion-protected versions of this device are to be operated only by personnel who has
undergone special training or instructions or who is authorized to work on explosion-pro-
tected devices in hazardous areas.
− Any hazards that could be caused in the valve by the process medium, the signal pres-
sure or by moving parts are to be prevented by taking appropriate precautions.
− If inadmissible motions or forces are produced in the pneumatic actuator as a result of
the supply pressure level, it must be restricted using a suitable supply pressure reducing
station.
To avoid damage to any equipment, the following also applies:
− Proper shipping and storage are assumed.
Note:

Devices with a CE marking fulfill the requirements of the Directives 2014/34/EU and
2014/30/EU. The declaration of conformity is included in the Appendix of these in-
structions.
6 EB 8394 EN