Accessing Functions Via Codes; Accepting A Waiting Call; Call Waiting - Siemens Hicom 150 E optiset E basic Operating Instructions Manual

Accessing Functions Via Codes

Call Waiting

Accepting a Waiting Call

Consultation
Consultation
or (depending on
configuration)
Consultation
Function Keys / Accessing Functions Via Codes
You can enter codes to access the following
functions.
Lift the handset.
Dial the internal station number.
If the party is busy, wait approximately five
seconds. The party is then called.
You hear a bleep tone during a call
Replace the handset (the current call is dis-
connected). Your telephone rings.
Lift the handset.
or
Press the Consultation key.
The first call is on hold.
Enter the code
5 5
the waiting party.
To return to the first call
Press the Consultation key, wait two seconds
and resume the first call (the second call is
disconnected).
Press the Consultation key twice
and resume the first call (the second call is
disconnected).
* 55, and conduct a call with
13