Table of Contents
Advertisement
2-3
EtherNet/IP Network Configuration
The EtherNet/IP network configuration consists of an IPC Machine Controller and the EtherNet/IP De-
vices. You use the built-in EtherNet/IP port on the Box PC to connect EtherNet/IP Devices.
NY-series
IPC Machine Controller
Additional Information
Refer to the NY-series IPC Machine Controller Industrial Panel PC / Industrial Box PC Built-in
EtherNet/IP Port User's Manual (Cat. No. W563) for EtherNet/IP network configuration details.
2-3-1
Related EtherNet/IP Hardware
IPC Machine Controller
The Machine Controller Software located on the Box PC is the central controller for machine automa-
tion.
Ethernet port 2 on the Box PC is the built-in EtherNet/IP port.
Additional Information
• Refer to Relevant Manuals on page 2 for EtherNet/IP related manuals.
• Refer to EtherNet/IP Connector Specifications on page 4 - 17 for port specifications.
EtherNet/IP Devices
A device that exchanges data with the Machine Controller Software through the EtherNet/IP network.
Additional Information
Refer to the specific EtherNet/IP Device manuals for details.
NY-series Industrial Box PC Hardware User's Manual (W556)
Sysmac Studio Automation Software
Port 2
EtherNet/IP
NJ/NX-series
2 System Configurations
HMI
2 - 5
2
Advertisement
Table of Contents
