Table of Contents
Advertisement
7 Maintenance
7
Align the connectors of the replacement drive as shown
placement drive
with a torque of 0.35 N·m.
8
Insert the bracket with the replacement drive into the correct bay of the Box PC.
Ensure the bracket is completely in the Box PC with an extra push.
The drive bracket will lock into place when it is fully inserted.
7 - 12
1
in the bracket and insert the 4 mounting screws
A
on the bracket. Then insert the re-
2
A
NY-series Industrial Box PC Hardware User's Manual (W556)
. Tighten these screws
Advertisement
Table of Contents
