2-7-4
Ethernet Connectors
The Ethernet connectors provide 3 individual Ethernet ports on the IPC RTOS Controller.
Each port offers 10BASE-T/100BASE-TX/1000BASE-T Ethernet speeds.
Additional Information
• Refer to 4-2-4 Ethernet Connector Specifications on page 4-15 for specifications.
• Refer to 5-5 Connect on page 5-42 for connection details.
2-7-5
DVI Connector
The DVI interfaces supported on this connector are dependent on the configuration of the IPC RTOS
Controller.
Additional Information
• Refer to 1-4 Product Configuration on page 1-5 for configuration details.
• Refer to 4-2-5 DVI Connector Specifications on page 4-18 for specifications.
• Refer to 5-5 Connect on page 5-42 for connection details.
NY-series IPC RTOS Controller Hardware User's Manual (W581)
2 Hardware
2
2-13