Overall Operating Procedure - Omron NY532-1*00-112*13**0 User Manual

1-5

Overall Operating Procedure

This section gives the overall operating procedure of the IPC Machine Controller.
Step 1. Design the Factory Automation Software
Design the overall system configuration, machine control programs and Windows applications interacting with
the Machine Controller Software.
Description
Step 1-1 Design the machine control programs
Step 1-2 Specify variables and data to be ex-
changed between the Machine Controller Soft-
ware and Windows applications
Step 1-3 Design the Windows applications inter-
acting with the Machine Controller Software
Step 2. Setup the Machine Controller Software
Create the system configurations that you designed in step 1-1 and 1-2 and assign the variables. Create the
tasks and programs, and debug them, e.g., with simulations.
Description
Step 2-1 Slave and Unit Configurations
Step 2-2 Controller Setup
Step 2-3 Programming
Step 2-4 Offline Debugging
Step 3. Setup the Windows Applications
Create the Windows applications that you designed in step
1-2 and 1-3 using the NY-Compolet API and the Industrial
PC System API.
Step 4. Install the Box PC
Mount the Box PC and implement it in the automation environment.
Description
Step 4-1 Install options
Step 4-2 Mount
Step 4-3 Wire
Step 4-4 Connect
NY-series Industrial Box PC Hardware User's Manual (W556)
1 Introduction to the Industrial Box PC
Reference
NY-series IPC Machine Controller Industrial
Panel PC / Industrial Box PC Software User's
Manual (Cat. No. W558)
•
NY-series IPC Machine Controller Industrial
Panel PC / Industrial Box PC Software User's
Manual (Cat. No. W558)
•
NY-series IPC Machine Controller Industrial
Panel PC / Industrial Box PC Setup User's
Manual (Cat. No. W568)
NY-series IPC Machine Controller Industrial
Panel PC / Industrial Box PC Setup User's Man-
ual (Cat. No. W568)
Reference
•
NY-series IPC Machine Controller Industrial
Panel PC / Industrial Box PC Software User's
Manual (Cat. No. W558)
•
Sysmac Studio Version 1 Operation Manual
(Cat. No. W504)
NY-series IPC Machine Controller Industrial
Panel PC / Industrial Box PC Setup User's Man-
ual (Cat. No. W568)
Reference
5-2 Install Options on page 5 - 5
5-3 Mount on page 5 - 14
5-4 Wire on page 5 - 26
5-5 Connect on page 5 - 40
1
1 - 7