Table of Contents
Advertisement
EtherNet/IP Connector Specifications
The EtherNet/IP connector is assigned to the Machine Controller Software.
This port can be used for communication between the IPC Machine Controller and Ethernet/IP units.
Ethernet connector number
Physical layer
Frame length
Media access method
Modulation
Topology
Baud rate
Transmission media
Maximum transmission distance between Ethernet switch and node
Maximum number of cascade connections
CIP Serv-
Maximum number of connections
ice: Tag da-
Packet interval
ta links (cy-
clic commu-
Permissible communications band
nications)
Maximum number of tag sets
Tag types
Number of tags per connections (i.e., per tag set)
Maximum number of tags
Maximum link data size per node (total size for all
tags)
Maximum data size per connection
Maximum number of registrable tag sets
Maximum tag set size
Multi-cast packet filter
CIP mes-
Class 3 (number of connections
sage serv-
UCMM (non-connection
ice: Explicit
type)
messages
Number of TCP sockets
NY-series Industrial Box PC Hardware User's Manual (W556)
Item
Maximum number of cli-
ents that can communi-
cate at one time
Maximum number of serv-
ers that can communicate
at one time
4 Specifications
Specifications
2
10BASE-T, 100BASE-TX or 1000BASE-
T
1,514 bytes max.
CSMA/CD
Baseband
Star
1 Gbps (1000BASE-T)
STP (shielded, twisted pair) cable of
Ethernet category 5,5e or higher
100m
There are no restrictions if an Ethernet
switch is used.
128
1 to 10,000 ms in 1.0-ms increments
Can be set for each connection.
20,000 pps (including heartbeat)
128
Network variables
8 (7 tags if Controller status is included
in the tag set)
256
184,832 bytes
1,444 bytes
128 (1 connection = 1 tag set)
1,444 bytes (Two bytes are used if Con-
troller status is included in the tag set)
Supported
64 total (clients plus server)
32
32
30
4
4 - 17
Advertisement
Table of Contents
