Table of Contents
Advertisement
3
Connect the I/O connector.
Hold the black part
Do not tilt the orange levers
4
Connect an external monitor such as the Industrial Monitor.
Connect the monitor to the DVI interface and tighten the fastening screws or use the optional
NYML connector.
For an Industrial Panel PC this is optional because a monitor is integrated.
5
Connect a device to the optional interface (DVI, RS-232C or NYML) if applicable and tighten
the fastening screws when applicable.
6
Connect the USB ports to peripheral devices .
7
Connect the Box PC to the required Ethernet interface connector(s).
Refer to 5-5-3 Ethernet Connection Procedure on page 5 - 44 for Ethernet port details.
The Box PC is connected.
NY-series Industrial Box PC Hardware User's Manual (W556)
A
when inserting the connector, this enables the auto-locking mechanism.
A
B
B
because this will unlock the connector.
5 Installation
5
5 - 43
Advertisement
Table of Contents
