Preparing A Win98 Pc - Siemens HiPath HG 1500 Service Manual

lan2de.c03
Startup
Initial startup of HiPath HG 1500

3.1.4 Preparing a Win98 PC

Step
1. Install and configure Dial-Up Networking
Start > Settings > Control Panel > Software
Windows Setup > Connections > Details
Select Dial-Up Networking > OK
Microsoft > Dial-Up Adapter
Click with the right mouse button on Network Neighborhood > Properties >
Add > Network Card > Dial-Up Adapter
Add > Protocol > Microsoft
Bind TCP/IP protocol to Dial-Up Adapter under TCP/IP > Dial-Up Adapter
>Properties >Bindings>
Deactivate "no WINS"
Do not bind other protocols (IPX or NetBEUI) to the Dial-Up Adapter
2. Add modem
My Computer > Control Panel >
Under Add Modems, activate "Don't detect my modem; I will select it from
a list". Click Next >
(Standard Modem Types) >
Standard 9600 bps Modem > Next >
Select COM port
3. Configure Dial-Up Networking Connection to Hicom 150 E Office
My Computer > Dial-Up Network >
Create New Connection >
Select "Standard 9600 bps Modem" >
Then select the COM port (connection to Hicom 150 E Office) >
and specify the name of the connection, e.g. "SLIP to HLB". The modem
is normally correctly configured (8 bits, no parity, 1 stop bit). Under "Ad-
vanced", select: Hardware (RTS/CTS)
Properties of the new connection: "SLIP to HLB". Telephone number, e.g.
"1". Do not use country and area code. Under Server >
Type of Dial-Up Server>
"SLIP - UNIX connection": do not log onto network, define only the TCP/IP
protocol and the IP address using 1.0.0.2 as the default gateway in the
remote network
4. Install Assistant.
5. Under Options > Administratable HiPath HG 1500 Cards > HiPath HG
1500 Cards, enter a name and an IP address.
3-4
Task
A31003-K5020-S100-4-7620
For internal use only
Service Manual