Siemens HiPath HG 1500 Service Manual page 20

For internal use only
Interfaces/connectors
X2: 6-pin shielded MiniDin socket for V.24 cable see Section 2.1.3
The board is connected to the system via the backplane. An adapter for the back-
plane (part number C39228-A7195-A10) is used to connect the LAN with an
RJ45 connector.
LED H2 (green)
LED H1 (red)
Figure 2-2
A31003-K5020-S100-4-7620
Service Manual
HXGM
RJ45 adapter cable connection to LAN
X2 V.24
HXGM interfaces (S30810-Q2930-X/X100)
LAN boards for Hicom OfficePoint/Com/Pro
lan2de.c02
Installation
Backplane
to
BP
not
used
-> LAN
X39/X49/
X59/X69/
X79
2-5