Table of Contents
Advertisement
Network Control
The title in the yellow rectangle of the parameter list and the parameter
list will change with the navigation menu when switched.
• There may be a "(S)" icon followed by some parameter name in the
parameter list, it is mean that this parameter is only a local parameter for
the current selected signal source, otherwise, the parameter is global and
the modification is valid for all signal sources.
• The SET button is used to confirm the modification of the parameter value.
6.2.1 ADJUST Menu
It will introduce ADJUST menu.
Click ADJUST button at the left navigation menu list, it will display the
adjust parameters, as shown in Figure 6.2-5:
Figure 6.2-2 Parameter List
60
Advertisement
Table of Contents
