Table of Contents
Advertisement
and the WFM frame of the slave picture displays at the bottom right
corner of the screen. Meantime, if Audio Meter was shown up, it could
display at the top position of the screen, just at the top left corner or at
the top right corner, thus to avoid colliding with the WFM.
Scope for the slave picture
2.
The selection scope of the signal source for the slave picture will be
changing with the main picture's source, as shown in Table 5.1-10:
Table 5.1-9 The Relationship of the Signal Source for Slave Picture and
Signal
Source
for
Main Picture
SDI1
\ Signal Source for
Slave Picture
SDI1
SDI2
LINE1(CVBS)
LINE2(CVBS)
LINE2(Y/C)
LINE2(YPBPR)
HDMI
The input signal information of the main picture displays at the top left
corner of the screen, and the one of the slave picture displays at the top
right corner of the screen.
When the AUTO STANDBY is set to ON, the device will be standby when
the signal is disappeared for 60s.
The length of LOCK NUMBER is up to 8 characters, you can use the
combination of these characters: number (0 to 9) and letter (A to Z). Press
ENTER to edit the LOCK NUMBER, than use UP or DOWN to select
characters, than press ENTER to go to next character, press MENU to exit
editor.
Main Picture
LINE1
LINE2
SDI2
(CVBS)
(CVBS)
41
Functionality of the Main Menu
LINE2
LINE2
(Y/C)
(YPSPR)
HDMI
Advertisement
Table of Contents
