Table of Contents
Advertisement
As shown in Figure 6.2-1, the management interface is divided into the
following parts:
Input Source Selection Button
1.
It is used to selecting an input source as the input signal, such as: SDI1,
SDI2, LINE1, LINE2(CVBS), HDMI. The selecting box of "Apply to All"
at the right side is used to synchronize the settings for all the other kinds
of input sources.
Navigation menu list
2.
It shows the navigation menus: STATUS, ADJUST, VIDEO DISPLAY,
INPUT SETUP, MARKER, AUDIO, DISPLAY, CLOSE CAPTION,
CONFIG, COLOR TEMPERATURE, FUNCTION KEY, GPI, IMD and
SYSTEM. Click the navigation menu, it will show the corresponding
settings on the right side. The menu items in main menu on screen
display are mostly as the same as the menu items listed in navigation
menus except SYSTEM, ADJUST and VIDEO DISPLAY.
Parameter list
3.
It shows the parameter names, values and operation buttons of the
selected navigation menu, as shown in the red rectangle in Figure 6.2-2.
Figure 6.2-1 Management Interface
59
Network Control
Advertisement
Table of Contents
