Table of Contents
Advertisement
XCM-240 Features
Video Input Interface (BNC)
3.
It provides two SDI input interfaces, one is labeled as SDI1 IN, and the
other is SDI2 IN.
HDMI
4.
It provides one HDMI input interface, HDMI Type-A connector with a
fastener.
Video Output Interface (BNC)
5.
It provides two SDI output interfaces. One is labeled as SDI1 OUT, the
other is SDI2 OUT, active loop.
Ethernet (RJ-45)
6.
It provides one 10/100M Ethernet connector. It is used to connect with a
computer to modify the network settings.
GPI(DB9)
7.
It assigns a function to each pin of the GPI interface to realize a remote
control mode. Define a function to the GPI pin. Refer to "5.1.10 GPI
Menu" for the definition of the pins and the functions.
The relationship of the pins of GPI interface and its channel value is
shown in Table 4.2-2.
Table 4.2-1 The Relationship of GPI Pins and Channel Values
IN/ OUT RS485 Interface (RJ-45)
8.
Pin No.
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Channel Value
GPI1
GPI2
GPI3
GPI4
GPI5
GPI6
NC
GND
18
Advertisement
Table of Contents
