Table of Contents
Advertisement
Default
Items
Value
IMD ID
0
IMD NAME
XXXXXXXX
BAUD RATE
38400
LED TALLY
ON
OSD
TALLY
RG
MODE
IMD
TALLY
T1
MODE
TALLY
STANDARD
SOURCE
If IMD DISPLAY item is ON, the IMD CHARACTER in the black bar will
display on the bottom of the screen.
The length of IMD NAME and IMD CHARACTER is up to 16 characters.
The character range is from 0x00 to 0x7F of ASCII. Press ENTER to edit
the IMD characters, than use UP or DOWN to select characters, than press
ENTER to go to next character, press MENU to exit editor. The KEY
INHIBIT is ON, KEY INHIBIT is enabled and press the POWER key, the
device would turn on or off. MENU, UP, DOWN, ENTER key can be
Domain Range
TSL4.0
TSL5.0
IMAGE VIDEO
NETWORK
0~255
2400/4800/9600/19200
/38400/57600/115200
OFF/ON
RG: Red/Green
GR: Green only
RGY:
Red/Green/Yellow
OFF: No tally light
T1/T2/T1T2/T2T1/T1-/
T2-/T1T2-/T2T1-
STANDARD/IMAGE
IDEO/TSL
49
Functionality of the Main Menu
Description
Set the ID number for
each monitor
Set an IMD name for
each screen.
Select a baud rate for
communication.
Set whether to switch on
tally light.
Select the OSD Tally
mode. Only the TALLY
SOURCE is STANDARD
or STANDARD + IV422,
the setting is available.
Select the IMD Tally
mode.
Use this setting when
using the Image Video
tally control, this setting
will determine the state
which is selected.
Select the source for
LED tally source
Advertisement
Table of Contents
