Directions For Use; Hand Control Operations - OAKWORKS 300 Series User Manual

DIReCTIOnS fOR USe

hAnD COnTROl OPeRATIOnS

CAUTIOn
The Multi-function Hand Control operates all functions by holding down one button at a time.
Follow the directions below to access these functions. If a function button does not release, pressing
and holding any other function button will stop the motion.
height Up
back Rest Up
leg Rest Up
fully down and
seated position
fully up and
flat position
Do not sit on the Fowler (Backrest) or Leg Rest sections. Do not leave the patient unat-
tended. When lowering the chair or using the Trendelenburg functions, make sure there is
nothing that can impede motion (like stools, cabinets, accessory parts, cleaners, etc.)
Trendelenburg - head
end down (up to 15º)
Memory function
Reverse Trendelenburg -
foot end down (up to 5º)
MeMORy fUnCTIOn USe
Use any of the top 8 buttons to orient the chair in a
favorite position. Press and release the MEM button
twice within five seconds and listen for two quick beeps.
Your position is now set when you use this button. To
set the chair into a different position, simply follow steps
above to readjust your memory position.
height Down
back Rest Down
leg Rest Down
Zero-Gravity
5