Directions For Use; Adjusting Height - OAKWORKS Clinician User Manual

Electric/hydraulic and manual/hydraulic
Table of Contents

Advertisement

CAUTION
When operating the
controls and making any and
all adjustments to the table,
move hands and feet away
from the working mechanism of
the table.
CAUTION
Risk of Injury – Children should
never be near the table when in
use. The table must be locked out
(use key lock) and controls stored
out of reach if there is any possibil-
ity that children would be near the
table when not in use.
When operating the table's con-
trols be sure to observe all cau-
tions and warnings given in the
manual to prevent injury to both
operator and client.
D A I L Y C Y C L I N G
The O
Clinician uses hydraulics and hydraulic fluids to adjust the table
®
akworks
height. Maintaining the quiet operation of your table requires that you fully cycle
your table (up & down) twice per day. Cycling of the table will maintain the
lubrication within the hydraulic cylinders for continued smooth and quiet opera-
tion. If daily cycling is not possible, we recommend that you cycle the table (up
& down) 7 times at least once per week.
A D J U S T I N G H E I G H T O F T H E T A B L E
Foot Control
Operate the foot control as shown below to raise or lower the height of the table.
When operating the table's controls, be sure to observe all cautions and warnings as
given in the manual.
Foot Control: used to change height
UP
To move the table posi-
tion higher, press down
on the left side of the
foot control.
A D J U S T I N G T H E H E I G H T O F T H E T A B L E
To raise the
table, unfold
crank handle
until it locks
into position.
Turn crank clockwise to
raise table to desired height.
To fold handle out of the way, rotate until
the handle is at its lowest point, then pull
out slightly. Fold down under the table.
Note: Folding the handle when it is not at its
lowest point can damage the fabric around
the handle.
D I R E C T I O N S F O R U S E
(E L E C T R I C/H Y D R A U L I C)
To move the
table position
lower, press
down on the right
side of the foot
control.
(M A N U A L/H Y D R A U L I C)
Raise table
To lower the table, turn the
handle counter-clockwise.
DOWN
Lower table
9

Advertisement

Table of Contents
loading

Table of Contents