Table of Contents
Advertisement
PRODUCT USe DeSCRIPTIOn / IMPORTAnT SAfeTy InSTRUCTIOnS
PRODUCT USe DeSCRIPTIOn
The Procedure Chair is a powered positioning examination table used to support the patient during
medical procedures. It is intended to be operated by a healthcare professional in a medical environ-
ment. No special training is required but a review of the following Safety Instructions is important
for the safety of the operator and patient. The healthcare professional should read and understand
this entire manual before use with a patient. There are no known contradictions to the use of this
equipment.
SyMbOl IDenTIfICATIOn
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an
electrical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective Earth
(Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates that the
product should be protected from moisture. The humidity specifications for Transport &
Storage are listed in the environmental conditions section of this manual.
This symbol is used to indicate that the operator should consult the user manual.
This symbol, when used in this manual and on product labels, indicates that the table and com-
ponents are a Type B Applied Part pursuant to IEC 60601-1: 2005.
~
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current
----
(DC).
IMPORTAnT SAfeTy InSTRUCTIOnS
CAUTIOn
The Back Rest and Leg Rest sections are not designed to support the entire weight of the patient. Do not sit on the Back Rest
or Leg rest sections.
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according to
the EMC information provided in this manual.
Portable and mobile RF communications equipment can affect Medical Electrical Equipment.
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in increased emissions or
decreased immunity of the Procedure Chair.
ReAD AnD SAve TheSe InSTRUCTIOnS
1
Advertisement
Table of Contents
