Swivel Base Use; Retractable Foot Rest (Stirrup) Use - OAKWORKS 300 Series User Manual

Procedure chair
Hide thumbs Also See for 300 Series:
Table of Contents

Advertisement

DIReCTIOnS fOR USe

SWIvel bASe USe

CAUTIOn
The chair can be rotated with a patient in it. Locate the black push buttons at the top of the back rest section.
Press in and hold either one of the buttons to disengage the base locking mechanism. While holding in the push
button, rotate the chair to the desired position up to 240°.
ReTRACTAble fOOT ReSTS (STIRRUP) USe
CAUTIOn
1. Fully lower the powered
foot rest to allow access to
the stirrup.
To store stirrups, lift slightly, rotate towards the middle of the chair and
fold the foot rest down. Then lift slightly and push into the storage position.
When rotating the chair, make sure there is nothing around the chair that can impede the
rotational motion (like stools, cabinets, etc)
Pinch Point - Keep fingers away from pinch point.
2. Grasp Stirrup handle &
pull out firmly while lifting
slightly. Pull fully out.
rotate up
º
to 240
3. Fold out to fully open
position.
4. To rotate stirrup to the
desired angle, lift slightly
and move to the desired
position. There are 3
detent positions. Stop lift-
ing and move slightly left
or right for the nearest
detent position.
5. To reduce stirrup
length, lift the handle
slightly and push into
desired position. Stirrup
will automatically lock
into nearest detent posi-
tion.
7

Advertisement

Table of Contents
loading

Table of Contents