Section 21
IED hardware
21.4.2
21.4.2.1
1208
19" panel rack mounting
Overview
All IED sizes can be mounted in a standard 19" cubicle rack by using the for each size
suited mounting kit which consists of two mounting angles, fastening screws and
washers for the angles.
The mounting angles are reversible which enables mounting of IED size 1/2 x 19" or
3/4 x 19" either to the left or right side of the cubicle.
Please note that the separately ordered rack mounting kit for side-by-
side mounted IEDs, or IEDs together with RHGS cases, is to be
selected so that the total size equals 19".
Use only the screws included in the mounting kit when mounting the
plates and the angles on the IED. Screws with wrong dimension may
damage the PCBs inside the IED.
1MRK502052-UEN B
Technical manual