WaterLogic CUBE FIREWALL Manual page 82

RESETTING THE HOT TANK OVERLOAD OR HIGH LIMIT SAFETY
1. Turn off both the Green Heater/Compressor Switch and the
Red Power Switches located on back of unit
O=OFF
9. Unplug power to unit.
10. With a Phillips Head Screwdriver, remove the two screws at
back of the Top Cover – as shown.
11. Remove top panel by placing your hands on the top and
pushing the top panel towards the rear.
Lift and remove as shown.
12. With a Phillips Head Screwdriver, Remove the two screws on
the Right Side Panel as shown.
Remove Right Side Panel.
CUBE Manual Page 82 - Revision: 5-24-2017