WaterLogic CUBE FIREWALL Manual page 61

3. Filter Service Icon Flashing
Change filter. See Filter Replacement Instructions in this Troubleshooting Section
Reset Filter Service Timer. Reset by selecting the Hot and Cold icons simultaneously and holding
them for 10 seconds. The CUBE Water Treatment System will beep and the filter service indicator
light will turn off once reset is complete
CUBE Manual
Filter Timer is enabled and has reached the designated
service schedule (3, 6, or 12 months).
Audible alarm will sound for 15 seconds and Filter Service
Light will flash until reset.
Water will continue to dispense unless filter is completely
fouled and restricts output.
Solution
Page 61 - Revision: 5-24-2017